Home>News>CONCRETE CURE AND SEAL FOR NEW CONCRETE CURING CS SERIES™

CONCRETE CURE AND SEAL FOR NEW CONCRETE CURING CS SERIES™

Add time:2017-11-22 From:bffoo.com Clicks:

Introduction:Concrete cure and seal is designed to help newly poured concrete curing process with two main features. First is to evenly cure concrete by maintain moisture not just on the surface, but within also, aiding the concrete to reach its full potential in compressive strength.

Concrete cure and seal products by SureCrete. Manufactured with high-quality materials, Surecrete’s CS Series Cure n’ Seal comes in 3 different versions: 25% Solids Solvent-Based, 25% Solids Low VOC., and 12.5% Solids Lov VOC to meet contractors specific application needs. Other Names used Kure and Seal, Cure & Sealer, Cure Seal.

 

Concrete cure and seal is designed to help newly poured concrete curing process with two main features. First is to evenly cure concrete by maintain moisture not just on the surface, but within also, aiding the concrete to reach its full potential in compressive strength. The harder the concrete matrix becomes, the longer the concrete will last. Many find that using cures on freshly poured concrete that has been colored such as color hardener or integral color additives, helps manage efflorescence, strengthens the cream finish (top of the concrete), and consistency of color.

 

There are two types of Cure and Seals; dissipating and non-dissipating. The second feature for cure and seal would be the sealing properties. Not only does this help protect the fresh concrete, it provides color enhancement.

 

The CS Series by SureCrete is a solvent based, non-dissipating, cure and seal finishing membrane that enhances the curing process of freshly placed concrete and provides protection simultaneously. Upon application, it forms a water retentive film that beneficially restricts moisture loss allowing concrete to reach its optimal cure and hardness, providing an economical alternative to costly, time-consuming water curing. The formulation of cure n’ seal makes it possible, as the name suggests, for it to be applied during the curing process of newly poured concrete.

 

HOW TO APPLY CS SERIES CONCRETE CURE AND SEAL PRODUCTS:

 

SureCrete’s Cure and Seal products are some of the easiest on the market to use:

 

1.Any surface that is about to be sealed needs to be thoroughly clean, free of all contaminants and porous enough to accept a sealer coating.

 

2.Make sure that temperatures will remain between 50 and 90 degrees Fahrenheit and there will be no precipitation in the applied areas for a 24 hour period following application.

 

3.SureCrete’s CS Series concrete cure and seal can be implemented by roller, airless sprayer or pump-up sprayer. Whatever your application technique, make sure to apply thin, even coats over your surface.

 

4.Two coats are typically suggested with any exterior project receiving a cure and seal product, with the second layer being applied as soon as the first coat can be walked on, and is used in the same manner as the first coat.